SmartCare Apcorep Kretecoat GF
Glass flake epoxy coating system (primer + topcoat) for RCC and steel structures exposed to severe chemical corrosion. Offers high abrasion resistance, thermal stability, and impermeable barrier against water and chemicals.
High chemical & abrasion resistance
Excellent thermal stability
Low VOC & high gloss retention
Superior impedance & chloride resistance
Uses
Characteristics
Properties
- Water treatment tanks
- Pipe bridges
- Settlement tanks
- Process vessels
- Acid pickling tanks
- ETP
- Storage tanks
- Incinerators
- Two-component epoxy
- Glass flake reinforced
- High durability
- Chemical resistant
| Adhesion | ≥2.5 MPa |
| Compressive Strength | 65 MPa |
| Flexural Strength | 48 MPa |
| Tensile Strength | 18 MPa |
| Shore D Hardness | 75 |
| Abrasion Resistance | <70 mg (1000 cycles) |
| Salt Spray Resistance | Pass (2000 hrs) |
| Temperature Resistance | Continuous 80°C, Intermittent 110°C |
Version No. V01/23. Please note that this datasheet supersedes all
previous versions
