HDPE
Search
Trending Queries
Quick Links
Actions
Best Results
PU Flooring System
Cementitious PU self-levelling floors with fast return to service
Built for Washdown, Heat, and Chemical Exposure
Food, beverage, dairy, bakery and pharma floors demand fast reopening, resistance to chemicals, and tolerance to heat while staying seamless and hygienic.
Cementitious PU systems are positioned for exactly these operating conditions, combining durability with a monolithic finish.
How Cementitious PU Floors Are Built Up
Substrates are mechanically prepared (scarifying/grinding/shot blasting) and cleaned; acid etching is avoided due to debonding/blistering risk. A scratch coat is used to seal the surface; pinholes are checked and corrected before the body coat is placed. The self-levelling coat is applied by notch trowel and de-aerated using spike rolling; mixes are executed in full packs within short pot life.Where needed, a moisture-tolerant PU IPN system can be selected for higher substrate moisture (up to 15%), while still avoiding rising damp.
Self-Levelling PU
PU Sealer
Performance at a Glance
Mechanical Strength
Compressive strength ~38–50 MPaHigh strengths for impact and traffic.
Heavy-duty performance under impact and traffic.
Abrasion & Wear
Abrasion ~120 mg/1000 cycles (CS17/1kg)
Resists wear in high-use industrial zones.
Adhesion to Concrete
Pull-off adhesion >1.5 MPa (concrete failure)
Strong bond when substrate is well prepared.
Slip & Electrical Behavior
Slip “Moderate”; resistivity ~2.5×10¹¹ Ω
Balanced traction with defined resistivity.
Where You’ll See the Impact
Food & Beverage
Washdown zones, process rooms
Bakeries
Hot areas, frequent cleaning
Dairies
Wet areas, hygiene-critical bays
.png){kind=icon}
Pharmaceuticals
Clean production, corridors
Automotive
Assembly lines, workshops
Warehousing
Traffic aisles, loading zones
Operational Wins
Fast turnaround
Return to service quickly after curing.
Heat tolerance
Handles hot zones without early breakdown.
Chemical resilience
Resists a wide range of chemicals.
Reduced defects
Scratch coat limits pinholes and rework.